Industrial Hepa Vacuum

Check It On Amazon

Tygon Formulation R-3603 Laboratory Tubing is Crystal-clear and flexible and can handle virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. It is Long-lasting, crack-resistant, and is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup for so that cleaning is facilitated. This tubing is autoclavable. Coils are marked at 1-foot intervals for easy measuring. Remains flexible at -45 F (43 C). Durometer hardness: Shore A, 55.

Check It On Amazon

1/4" X 100' 200 PSI. Coupled 1/4" MPT Fittings. Flexible in subzero temperatures. UV stabilized for longer outdoor service. Reinforced urethane. 50% lighter than rubber hose. Excellent oil resistance. Shrink wrapped packaging.

Check It On Amazon

Aluminum coils. Round tubing in 50' lengths. Very strong material yet lightweight. Easy to work with and form.

Check It On Amazon

Molded of high-impact, resistant polycarbonate, these direct-reading flowmeters are supplied with scales in both English and metric units for liquid and air, all with 10:1 turndown ratios. These flowmeters has been designed to maintain maximum pressures to 100 psig and temperatures to 150°F. Flowmeters are ideal for OEM applications.

Check It On Amazon

Applications:Food and beverage processing, instrumentation, pure-water transfer, water conditioning, Characteristics: Plasticizer-free, 78 A durometer, can be used with barbed fittings, abrasion-resistant, excellent chemical compatibility, economical. Colored Flexelene™ tubing available upon request. Certification: Produced with compounds listed by NSF International Standards 51 and 61, and are in compliance with FDA 21 CFR 175.105 Temperature range:-40°F to 170°F (-40°C to 76°C) Sterilize: With ethylene oxide

Check It On Amazon

Interstate Pneumatics Nylon Coil Hoses are made from a tough nylon compound for consistent performance. These hoses provides you with the highest quality and the most extensive offering of hosing in the industry. We have in-stock hosing customizing sizes, lengths, and colors in single or multi-spiral hose without requiring large set-up charges or minimum runs. Excellent abrasion & corrosion resistance. Resistance to most chemicals – including Gasoline, Oil & Grease.

Check It On Amazon

When thin walls, tight tolerances and high strength are required, polyimide is the material of choice. Polyimide is in the select group of super polymers and is now available in micro and miniature tubing sizes. Our tubing has a thermal rating of -452F (-269C) To 700F (371C) for continuous use application with a dielectric constant of 3.4. This material is considered a benchmark for polymers in electrical insulation applications. This tubing exhibits exceptional dimensional stability and has very high burst pressure ratings. Excellent column strength and high stiffness has proven to provide good push and torque properties making polyimide tubing an excellent choice for catheters that are guided through the body's vascular system. Other uses include high strength, temperature and chemical resistant push rod tubes, and miniature structural matrices. This tubing can be steam, gamma or EtO sterilized and has excellent chemical resistance. Polyimide tubing can be bonded with cyanoacrylates, UV and room temperature cure epoxies.

Check It On Amazon

Compression fittings allow the hose to be repaired in the field. End restraints designed for longer hose life. All weather flexibility with working temperature range of neg 40-degrees to 164-degrees F. 300 psi max working pressure with 900 psi burst strength for toughness and safety. Lightweight and kink-free design.