Nylon 12 Metric Tubing offers very low moisture absorption and will not become brittle or swell because of water. Excellent resistance to flexural fatigue, tube vibration and movement. Nylon 12 tubing is lightweight and posses outstanding bend radii and pressure ratings. It is also resistant to crushing, abrasion and cracking.
AIR HOSE 100'x3/8"RUBBER
Chrome Plated material built to last. Thermostatic mixing valve automatically mixes cold and hot water together to make your desired outlet temperature. No more guessing at the knobs, trying to find that perfect temperature. Just set it with the temperature dial and enjoy perfectly warmed water. Safety lock prevents children from turning it beyond 38° C to prevent scalding. Model DN20 Port Size: 3/4" NPT Working Pressure: 4 to 145 psi Ideal Working Pressure: 14.5 to 75 psi Cold Water Temp: 5°C-29°C (41°F-84°F) Hot Water Temp: 55°C-95°C (131°F-203°F) Mixed Water Temp Range: 30°C-60°C (86°F-140°F) Temperature Control Accuracy: +/-2°C (+/-3.6°F) Preset Temperature: 38°C (100°F) Outlet Flow Rate @44 psi: 32 Lpm 8.5 gpm)
Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. It is easily welded or brazed by various commercial methods (caution: direct contact by dissimilar metals can cause galvanic corrosion). Since 6063 is a heat-treatable alloy, strength in its -T6 condition can be reduced in the weld region. Selection of an appropriate filler alloy will depend on the desired weld characteristics. Consult the Material Safety Data Sheet (MSDS) for proper safety and handling precautions when using alloy 6063. Alloy 6063 offers excellent response for anodizing in its -T5, -T52 , -T53 (“matte finish”), -T54, -T6 (“lustrous” finish) tempers. The most common methods are clear, clear and color dying, and bright dipping and hard coat. Bright dipping provides an economical alternative to mechanical polished finishes while offering improved surface durability.
Includes 3/8" x 100' Polyurethane Air Hose – DAP38100
RBVLI Features: -Polyester braid reinforced polyvinyl chloride tubing.-Manufactured to exact specifications.-Braided PVC has four times the working pressure of single wall PVC.-Smooth, dense bore maximizes flow and reduces sediment buildup.-Excellent resistance to acids, alkalis, and many solvents.-Handles a wide variety of chemicals, gases, and liquids.-Offers superior performance under severe operating conditions.-Excellent for hydraulic, pneumatic, and vacuum lines.-Certified to NSF 61 section 9 Clean Drinking Water standard.-+175 F maximum operation temperature.
The Astro Pneumatic 3682 3/8-Inchby50-Foot General Duty Hose Reel – Automatic Rewind with Rubber Hose has a spring located in the middle drum to ensure the stability of the whole unit. L-shaped base with groove reinforcement ensures stable support. 300psi air hose reel with automatic rewind. Unit has a solid rubber stopper, 4-way directional rollers, 2 position roller bracket assembly and a non-conductive hose. Also features a multi-position mounting arm which allows for floor, wall or ceiling mounting. SPECIFICATIONS Capacity: 3/8-inch by 50-Feet Hose Diameter: 15-inch (380mm) Width: 5-1/2-inch (140mm) Height: 16.70-inch (424mm) Air Inlet: 3/8-inch Air Outlet: 3/8-inch Hose Outlet: 1/4-inch
The Apollo 70-100 series two-piece inline ball valve is made of bronze and has a lever-handle with a nut and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass. It has a zinc-plated steel lever handle with a vinyl sleeve and nut for manual on/off control. The maximum pressure is 600 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and 150 for saturated steam. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Reinforced polytetrafluoroethylene (RPTFE) seats and multifill polytetrafluoroethylene (MPTFE) stem packing reduce the risk of valve leakage. This ball valve is standard (or regular) port for reduced valve size and cost and has a working temperature range of -20 to 450 degrees Fahrenheit. This valve is for use in water lines, processing plants, and agricultural applications and meets standard MSS SP-110 for quality assurance.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball’s position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Apollo manufactures ball, mixing, and relief valves, actuators, water gauges, marine fittings, heating and plumbing products, and backflow prevention devices. The company, founded in 1928 and headquartered in Matthews, NC, meets International Organization for Standardization ISO/IEC 17025:2005 and makes products that meet ISO and American National Standards Institute (ANSI) standards.
Tygon Formulation R-3603 Laboratory Tubing is Crystal-clear and flexible and can handle virtually all inorganic chemicals found in the lab. It is non-oxidizing and non-contaminating. It is Long-lasting, crack-resistant, and is less permeable than rubber tubing. The glassy-smooth inner bore helps prevent buildup for so that cleaning is facilitated. This tubing is autoclavable. Coils are marked at 1-foot intervals for easy measuring. Remains flexible at -45 F (43 C). Durometer hardness: Shore A, 55.
1/4" X 100' 200 PSI. Coupled 1/4" MPT Fittings. Flexible in subzero temperatures. UV stabilized for longer outdoor service. Reinforced urethane. 50% lighter than rubber hose. Excellent oil resistance. Shrink wrapped packaging.
![3/4" X 100' Braided Vinyl Tubing RBVLI [Set of 100]](http://ecx.images-amazon.com/images/I/41GZDhhtXlL._SL160_.jpg)
